The control box was on the tool closet or on the saw horse, or where ever… At that day it was on that white ruined kitchen drawer.
Relocated to it’s final location, case build still pending. I drilled two holes on the tool’s closet and used two 4mm screws to mount a small melamine board. This board will be the base to mount the permanent case of the control board and the some better mount for the USB charger that is powering the station.
Board is temporarily fixed with one screw.
It has it’s own power line now.
Now nothing on the floor or cables like Mumbai.
To get an idea of the balcony and where the station is. Left arrow points to anemometer plus sensors and the right arrow points the control box (on the side of the closet). Yes, I am monitoring my balcony’s micro climate.
